1,050 Hz Wavelength

How Long Is a 1050 Hz Wavelength?

A 1050 Hz sound wave has a wavelength of 0.33 meters, 32.69 cm, 1.07 feet (1 feet and 0.87 inches) or 12.87 inches when traveling in air at 20°C (68°F).

The formula for the wavelenght is λ = c/f where:

  • c is the celerity (speed) of sound = 343.21 m/s or 1126.03 ft/s in air at 20°C (68°F).
  • f is the frequency = 1050 Hz
which gives a wavelength λ of 0.33 meters, or 1.07 feet.

1050 Hz Wavelength Depending on Temperature

The speed of sound in air depends on temperature. Here is how the wavelenght of a 1050 Hz sound wave will vary according to temperature:

Temp (°C) Temp (°F) 1050 Hz wavelength (cm)1050 Hz wavelength (in)
-40-4029.150711.4767
-35-3129.461611.5991
-30-2229.769311.7202
-25-1330.073811.8401
-20-430.375311.9588
-15530.673812.0763
-101430.969412.1927
-52331.262312.3080
03231.552412.4222
54131.839912.5354
105032.124812.6475
155932.407212.7587
206832.687112.8689
257732.964712.9782
308633.239913.0866
359533.512913.1941
4010433.783713.3007

1050 Hz Half Wavelength and Standing Waves

The half wavelength of a 1050 Hz sound wave is 0.16 meters, 16.34 cm, 0.54 feet (0 feet and 6.43 inches) or 6.43 inches when travelling in air at 20°C (68°F).

Modes (or standing waves) will occur at 1050 Hz in rooms where two opposing walls (axial mode), edges (tangential mode) or corners (oblique mode) are spaced by a distance d = nλ/2 where:

  • n is a natural (positive integer greater than or equal to 1)
  • λ is the 1050 Hz wavelength = 0.33 meters, or 1.07 feet in air at 20°C (68°F).

1050 Hz Standing Waves Distances

n Distance (m) Distance (ft)
10.160.54
20.331.07
30.491.61
40.652.14
50.822.68

We typically don't treat rooms for standing waves above 300 Hz.

Given the relatively small 1050 Hz half wavelength, you can treat your room by using thick acoustic foam. This will absorb frequencies as low as 250 Hz, and all the way up to 20,000 Hz.

How To Convert 1050 Hz To ms

A Hz (Hertz) is a cycle (or period) per second.

Because a 1050 Hz wave will ocillate 1050 times per second, we can find the time of a single cycle (or period) with the formula p = 1/f where:

  • f is the frequency of the wave = 1050 Hz

The result will be expressed in seconds, so let's multiply by 1000 to get miliseconds:

1 / 1050 Hz * 1000 = 0.95 ms.