1,310 Hz Wavelength

How Long Is a 1310 Hz Wavelength?

A 1310 Hz sound wave has a wavelength of 0.26 meters, 26.2 cm, 0.86 feet (0 feet and 10.31 inches) or 10.31 inches when traveling in air at 20°C (68°F).

The formula for the wavelenght is λ = c/f where:

  • c is the celerity (speed) of sound = 343.21 m/s or 1126.03 ft/s in air at 20°C (68°F).
  • f is the frequency = 1310 Hz
which gives a wavelength λ of 0.26 meters, or 0.86 feet.

1310 Hz Wavelength Depending on Temperature

The speed of sound in air depends on temperature. Here is how the wavelenght of a 1310 Hz sound wave will vary according to temperature:

Temp (°C) Temp (°F) 1310 Hz wavelength (cm)1310 Hz wavelength (in)
-40-4023.36519.1989
-35-3123.61439.2970
-30-2223.86099.3941
-25-1324.10509.4901
-20-424.34669.5853
-15524.58599.6795
-101424.82289.7728
-52325.05759.8652
03225.29019.9567
54125.520510.0474
105025.748810.1373
155925.975210.2265
206826.199610.3148
257726.422110.4024
308626.642710.4893
359526.861510.5754
4010427.078610.6609

1310 Hz Half Wavelength and Standing Waves

The half wavelength of a 1310 Hz sound wave is 0.13 meters, 13.1 cm, 0.43 feet (0 feet and 5.16 inches) or 5.16 inches when travelling in air at 20°C (68°F).

Modes (or standing waves) will occur at 1310 Hz in rooms where two opposing walls (axial mode), edges (tangential mode) or corners (oblique mode) are spaced by a distance d = nλ/2 where:

  • n is a natural (positive integer greater than or equal to 1)
  • λ is the 1310 Hz wavelength = 0.26 meters, or 0.86 feet in air at 20°C (68°F).

1310 Hz Standing Waves Distances

n Distance (m) Distance (ft)
10.130.43
20.260.86
30.391.29
40.521.72
50.652.15

We typically don't treat rooms for standing waves above 300 Hz.

Given the relatively small 1310 Hz half wavelength, you can treat your room by using thick acoustic foam. This will absorb frequencies as low as 250 Hz, and all the way up to 20,000 Hz.

How To Convert 1310 Hz To ms

A Hz (Hertz) is a cycle (or period) per second.

Because a 1310 Hz wave will ocillate 1310 times per second, we can find the time of a single cycle (or period) with the formula p = 1/f where:

  • f is the frequency of the wave = 1310 Hz

The result will be expressed in seconds, so let's multiply by 1000 to get miliseconds:

1 / 1310 Hz * 1000 = 0.76 ms.