2,760 Hz Wavelength

How Long Is a 2760 Hz Wavelength?

A 2760 Hz sound wave has a wavelength of 0.12 meters, 12.44 cm, 0.41 feet (0 feet and 4.9 inches) or 4.9 inches when traveling in air at 20°C (68°F).

The formula for the wavelenght is λ = c/f where:

  • c is the celerity (speed) of sound = 343.21 m/s or 1126.03 ft/s in air at 20°C (68°F).
  • f is the frequency = 2760 Hz
which gives a wavelength λ of 0.12 meters, or 0.41 feet.

2760 Hz Wavelength Depending on Temperature

The speed of sound in air depends on temperature. Here is how the wavelenght of a 2760 Hz sound wave will vary according to temperature:

Temp (°C) Temp (°F) 2760 Hz wavelength (cm)2760 Hz wavelength (in)
-40-4011.08994.3661
-35-3111.20824.4127
-30-2211.32534.4588
-25-1311.44114.5044
-20-411.55584.5495
-15511.66944.5942
-101411.78184.6385
-52311.89334.6824
03212.00364.7258
54112.11304.7689
105012.22144.8116
155912.32884.8539
206812.43534.8958
257712.54094.9374
308612.64564.9786
359512.74955.0195
4010412.85255.0600

2760 Hz Half Wavelength and Standing Waves

The half wavelength of a 2760 Hz sound wave is 0.06 meters, 6.22 cm, 0.2 feet (0 feet and 2.45 inches) or 2.45 inches when travelling in air at 20°C (68°F).

Modes (or standing waves) will occur at 2760 Hz in rooms where two opposing walls (axial mode), edges (tangential mode) or corners (oblique mode) are spaced by a distance d = nλ/2 where:

  • n is a natural (positive integer greater than or equal to 1)
  • λ is the 2760 Hz wavelength = 0.12 meters, or 0.41 feet in air at 20°C (68°F).

2760 Hz Standing Waves Distances

n Distance (m) Distance (ft)
10.060.20
20.120.41
30.190.61
40.250.82
50.311.02

We typically don't treat rooms for standing waves above 300 Hz.

Given the relatively small 2760 Hz half wavelength, you can treat your room by using thick acoustic foam. This will absorb frequencies as low as 250 Hz, and all the way up to 20,000 Hz.

How To Convert 2760 Hz To ms

A Hz (Hertz) is a cycle (or period) per second.

Because a 2760 Hz wave will ocillate 2760 times per second, we can find the time of a single cycle (or period) with the formula p = 1/f where:

  • f is the frequency of the wave = 2760 Hz

The result will be expressed in seconds, so let's multiply by 1000 to get miliseconds:

1 / 2760 Hz * 1000 = 0.36 ms.