3,060 Hz Wavelength

How Long Is a 3060 Hz Wavelength?

A 3060 Hz sound wave has a wavelength of 0.11 meters, 11.22 cm, 0.37 feet (0 feet and 4.42 inches) or 4.42 inches when traveling in air at 20°C (68°F).

The formula for the wavelenght is λ = c/f where:

  • c is the celerity (speed) of sound = 343.21 m/s or 1126.03 ft/s in air at 20°C (68°F).
  • f is the frequency = 3060 Hz
which gives a wavelength λ of 0.11 meters, or 0.37 feet.

3060 Hz Wavelength Depending on Temperature

The speed of sound in air depends on temperature. Here is how the wavelenght of a 3060 Hz sound wave will vary according to temperature:

Temp (°C) Temp (°F) 3060 Hz wavelength (cm)3060 Hz wavelength (in)
-40-4010.00273.9381
-35-3110.10943.9801
-30-2210.21504.0216
-25-1310.31944.0628
-20-410.42294.1035
-15510.52534.1438
-101410.62684.1838
-52310.72724.2233
03210.82684.2625
54110.92544.3014
105011.02324.3398
155911.12014.3780
206811.21624.4158
257711.31144.4533
308611.40594.4905
359511.49954.5274
4010411.59254.5640

3060 Hz Half Wavelength and Standing Waves

The half wavelength of a 3060 Hz sound wave is 0.06 meters, 5.61 cm, 0.18 feet (0 feet and 2.21 inches) or 2.21 inches when travelling in air at 20°C (68°F).

Modes (or standing waves) will occur at 3060 Hz in rooms where two opposing walls (axial mode), edges (tangential mode) or corners (oblique mode) are spaced by a distance d = nλ/2 where:

  • n is a natural (positive integer greater than or equal to 1)
  • λ is the 3060 Hz wavelength = 0.11 meters, or 0.37 feet in air at 20°C (68°F).

3060 Hz Standing Waves Distances

n Distance (m) Distance (ft)
10.060.18
20.110.37
30.170.55
40.220.74
50.280.92

We typically don't treat rooms for standing waves above 300 Hz.

Given the relatively small 3060 Hz half wavelength, you can treat your room by using thick acoustic foam. This will absorb frequencies as low as 250 Hz, and all the way up to 20,000 Hz.

How To Convert 3060 Hz To ms

A Hz (Hertz) is a cycle (or period) per second.

Because a 3060 Hz wave will ocillate 3060 times per second, we can find the time of a single cycle (or period) with the formula p = 1/f where:

  • f is the frequency of the wave = 3060 Hz

The result will be expressed in seconds, so let's multiply by 1000 to get miliseconds:

1 / 3060 Hz * 1000 = 0.33 ms.